Product manual

CONTROL ROOM
MONITOR LEVEL CONTROL
MONITOR SELECTOR SWITCH
O P E R A T I N G I N S T R U C TI O N S
The Control Room Monitor system
The Control Room Monitor system is the main audio monitoring system for the studio. It features an input selector switch and a vol-
ume level control. The output of the monitor system is connected to an external audio power amplifier and speakers. The level control
on the external amplifier should be set for the maximum sound level desired in the studio.
MONITOR MUTING
When a control room microphone is turned on (channels one or two), the monitor system will mute (audio turned off) so that there
will not be feedback from the speakers to the microphone.
MONITOR SELECTOR SWITCH
This switch selects the audio source for the Monitor system. Push the switch down (LED will light) to select an external input to the
monitor speakers. This is usually an off-air source so that the final output of the station can be monitored. When the switch is up
(unlighted) the Program bus output of the console is being monitored.
MONITOR VOLUME FADER
Sets the monitor level into the external audio amplifier and speaker.
3.5