Product manual

B L U E T O O T H
7.4
HOW TO CONNECT AND USE A CELL PHONE
The Bluetooth feature of the ARC series console allows you connect
your cell phone to the ARC series console. Thus, enabling you to take
calls on your cell phone and either put them on air, or play them on
the Cue output. To do this:
1. Pair your cell phone to the Bluetooth ARC console using
the steps from the previous section. The red Drop button
will be lit if your cell phone is connected.
2. Turn on the Bluetooth channel on your board. (CH 7 for
the ARC-8, CH 10 for the ARC-10, CH 15 for the ARC-15)
3. Turn on the Bluetooth Channel to play out PGM out.
4. When a call comes in on your cell phone, you will notice
that the green Call button will flash. Press the blue Call but
ton to accept the call. Press the red Drop button to reject
(clear) the call.
5. When you are finished with the call, press the blue Drop
button to end the call. You may also accept, reject or drop
the call using your cell phone.
IMPORTANT NOTE: When talking to the caller, you will be using the Mic channel on the console (NOT your cell phone mic). When a Mic chan-
nel is on, then the Monitor speakers will be muted, and you will only be able to hear the caller through the Headphone output. You may
also adjust the volume of your caller on your phone, as well as on the console’s Bluetooth channel.
IMPORTANT NOTE: When a call comes in to your cell phone, the ring will play through the Bluetooth channel. For the best quality sound, we
recommend to leave the Bluetooth channel on the AUD output for when the call comes in. That way the ring will not play over the air. You
can then prepare the caller, and when ready, switch the channel to PGM to put the caller on air.