Product manual

O P E R A T I N G I N S TR U C TI O N S
The Control Room Monitor system
The Control Room Monitor system is the main audio monitoring system for the studio. It features an input selector switch and a vol-
ume level control. The output of the monitor system is connected to an external audio power amplifier and speakers. The level control
on the external amplifier should be set for the maximum sound level desired in the studio.
MONITOR MUTING
When a control room microphone is turned on (channels one or two), the monitor system will mute (audio is turned off) so that there
will not be feedback from the speakers to the microphone.
MONITOR SELECTOR SWITCH
This switch selects the audio source for the Monitor system.
1) AIR- this is usually an off air audio feed to monitor the actual transmitted signal
2) PGM- the main Program output bus from the console
3) AUD- a secondary Program bus that can be used for several purposes such as Recording
MONITOR VOLUME FADER
Sets the monitor level into the external audio amplifier and speaker.
CONTROL ROOM
MONITOR LEVEL CONTROL
MONITOR SELECTOR SWITCH
3.5