Product manual

I N S TA L L A TI O N I N S TR U C TI O N S
Monitor amp & Speakers
STEP 4- MONITOR SPEAKER CONNECTION
The console has a low level monitor audio output that is designed to connect to an external audio power amplifier. The console output will not directly drive
speakers.
Connect the audio amplifier input to the console Monitor Output on the back panel of the console. Follow the amplifier’s instructions and connect speakers to the
amplifier.
Turn the console power on and the amplifier power on. On the console, select PGM on the Monitor Selector switch and rotate the Monitor Volume control to 1/2.
Set the audio power amplifier level and front panel switches per the amplifier instruction manual.
WARNING- do NOT have all levels controls at maximum. Too much audio level through your speakers can damage the speakers.
There should be an audio source (such as CD player) connected to the console as described in Steps 1,2, & 3. Turn the console source channel on and play a
song. The VU meters should move with the audio and audio should be present at the headphone jack at the back of the console. Be certain that any mic channel is
turned off because it will mute the audio out of the speakers so that there is no feedback. Audio should now be audible through the monitor speakers.
TEST- The audio through the monitor speakers should be clear and without significant noise or hum.
STEP 4- CONNECT AN AMP & SPEAKERS
Connect an
audio power
amp and
speakers
to the MON
output of
the console
Audio power amp
4.5
RCA AUDIO CABLE
The Black con-
nector is right
and the Red con-
nector is left
Back panel Diagram for ARC-15BP console
Logic
RS232
DC Power
Cue
Ch 14
In
Phone Logic Pgm Left Pgm Rght Phone Ch 15 Phone
Out
Out Out In
PC
USB
Mic Ch 4
In
Mic Ch 5
In
Ch 13 Ch 12 Ch 11 Ch 10 Ch 9 Ch 8
48V
pwr
Ch 14
Out
Pgm
Out
Aud
AMM
PMM
Out
Mon
In
Air
L
R
L
R
L
R
L
R
L
R
ARC-15BP
Headphone
Ground
Ch 7 Ch 6 Ch 5 Ch 4 Ch3 Ch 2 Mic Ch 1
In
Mic Ch 2
In
Arrakis
Systems
Mic Ch 3
In
In