User Manual

- 17 -
Owner’s manual
Side panel L (MIDI, USB, MODE SWITCH)
Side panel R (power, main output jacks)
INITIAL OSCILLATOR FREQUENCY INITIAL OSCILLATOR FREQUENCY
a
b
c
h
g
i
d
e
f
MIDI
a. MIDI IN connector
You can connect an external MIDI device to this connector to receive MIDI data.
b. MIDI OUT connector
You can connect an external MIDI device to this connector to transmit MIDI
data.
c. MIDI THRU connector
The MIDI messages that are input via the MIDI IN connector are output without
change from this connector.
USB
d. USB B port
You can connect a computer to this port to transmit and receive MIDI data.
MODE SWITCH
This switch lets you set the MIDI channel and the auto power-off setting.
e. MODE SWITCH1–5
The combination of switches 1–4 specifies MIDI channel 1–16 (see “MIDI
channel” on page 24). Switch 5 enables or disables the auto power-off
function. (see
“Changing the auto power-off setting” on page 21).
f. TO 3620 connector
Use the included 8-pin DIN cable to connect this to the ARP 3620 keyboard unit.
Main output jacks
g. Main output L
Outputs the L channel audio signal of this unit. This is an XLR connector
(balanced). 1: GND, 2: HOT, 3: COLD
h. Main output R
Outputs the R channel audio signal of this unit. This is an XLR connector
(balanced). 1: GND, 2: HOT, 3: COLD
Power connector
i. ~ ACV connector
Connect the included AC power cord here.