User Manual

- 13 -
Owner’s manual
Front panel (MIXER, REVERB section)
INITIAL OSCILLATOR FREQUENCY INITIAL OSCILLATOR FREQUENCY
l
h
a
j
n
c
d
e
f
g
i
o
k
p
b
m
MIXER
a. Input 1 jack
This is the mixer input jack. The
VCF output is internally connected.
b. Input 2 jack
This is the mixer input jack. The
VCA output is internally connected.
c. Input level 1 slider
Adjusts the audio signal level of
mixer input 1.
d. Input level 2 slider
Adjusts the audio signal level of
mixer input 2.
e. Audio output 1 jack
This jack outputs an audio signal
that is adjusted by c. Input level 1
slider.
f. Audio output 2 jack
This jack outputs an audio signal
that is adjusted by d. Input level 2
slider.
g. L/R input jack
This is an input for the audio signal
that is output to both the left and
right channels. The mixer output is
internally connected.
h. PAN slider
Adjusts the panpot (left/right
volume balance).
i. LEFT INPUT jack
This is the input jack for the left
channel of the mixer.
j. LEFT OUTPUT jack
This jack outputs an audio signal
that sums the output of the spring
reverb adjusted by n. with the input
from the LEFT INPUT jack.
k. RIGHT INPUT jack
This is the input jack for the right
channel of the mixer.
l. RIGHT OUTPUT jack
This jack outputs an audio signal
that sums the output of the spring
reverb adjusted by o. with the input
from the RIGHT INPUT jack.
REVERB
m. Input jack
This is the input jack for the
spring reverb. The mixer output is
internally connected.
n. Level slider L
Adjusts the level of the LEFT signal
that is input to the spring reverb.
o. Level slider R
Adjusts the level of the RIGHT
signal that is input to the spring
reverb.
p. REVERB OUTPUT jack
This is the output of the spring
reverb. If a patch cable is connected
here, the reverberated signal from l.
is no longer output.