User Manual

ARP 2600 FS
- 12 -
Front panel (VCA section)
INITIAL OSCILLATOR FREQUENCY INITIAL OSCILLATOR FREQUENCY
a
b
j
f
g
h
i
c
d e
VCA (Voltage Controlled Amplifier)
a. INITIAL GAIN slider
Adjusts the CV offset voltage of the VCA.
b. AUDIO input 1 jack
This is the input jack for the VCA audio signal. The VCF is internally connected.
c. AUDIO input 2 jack
This is the input jack for the VCA audio signal. The ring modulator is internally
connected.
d. CV input 1 jack
This is the CV input jack that controls the VCA gain. The AR EG is internally
connected.
The VCA gain is proportionally related to this CV voltage.
e. CV input 2 jack
This is the CV input jack that controls the VCA output. The ADSR EG is
internally connected.
The VCA gain is exponentially related to this CV voltage.
f. AUDIO input level 1 slider
Adjusts the audio signal level of VCA AUDIO input 1.
g. AUDIO input level 2 slider
Adjusts the audio signal level of VCA AUDIO input 2.
h. CV input level 1 slider
Adjusts the signal level of VCA CV input 1.
i. CV input level 2 slider
Adjusts the signal level of VCA CV input 2.
j. Output jack
This is the VCA output jack. It outputs an audio signal whose volume varies
according to the CV signals from CV input 1 and CV input 2.
If the INITIAL GAIN slider (a) is moved all the way to the right, the audio
signal is output continuously without stopping.