Specifications

IRMS (Intelligent Redundant Multi-Switch)
54
Operating principle
IRMS is a device based on relay
technology that improves
electrical supply continuity. It can install
and manage up to eight network users
from a single point, using one or two
independent power sources, either
directly from the mains power supply or
via an UPS or a combination of both.
IRMS can connect each user
(up to eight, each with a maximum
power requirement not greater than 3A)
to either of the two power sources.
Full protection against mains
failures and load faults
Whenever the mains fails or one
source fluctuates outside acceptable
parameters, IRMS will automatically
switch the connected load over to the
alternative power source without
overlap. Switching is not only
performed in the event of mains failure
but also if a fault occurs on one of the
load. In case of short circuits or
overloads, IRMS disconnects the load
to prevent problems on any of the
others.
Simple mimic panel
A LCD panel provides detailed reports
on the operational status of your
equipment.
Hot swap function
If the primary source fails, IRMS
transfers to the secondary source
without any break in the power supply
to your application.
Installation
IRMS has been designed for installation
in a 19” rack-mount cabinet.
Communication
SNMP Network adapter and RS232
serial ports allow and facilitate
communication with installed power
protection equipment.
Applications
e-Business, ISP/ASP, Local Area
Networks (LAN), Servers farms,
servers.
MIMIC PANEL