Specifications

Input S5P-6000 S5P-6500 S5P-8000 S5P-10000
Technical dataSentinel 5 Plus
Nominal voltage 230 V single-phase 230 V single-phase or 400 V three-phase + N
Accepted voltage range 0-276 V
Voltage without battery discharging 170 V @ 100% load (140 V @ 50% load)
Input frequency 50/60 Hz
By-pass S5P-6000 S5P-6500 S5P-8000 S5P-10000
Voltage range 186 – 264 V (selectable in Economy Mode and Smart Active Mode)
Frequency range selected frequency ± 5 Hz
Output S5P-6000 S5P-6500 S5P-8000 S5P-10000
Power (VA/W) 6000/4200 6500/4600 8000/5600 10000/7000
Nominal voltage 220-230-240 V (selectable)
Voltage range static ±1%; dynamic ≤5% in 20ms
Voltage distortion <2% @linear load, <5% @ non-linear load
Frequency 50/60 Hz (selectable or autorange)
Crest factor 3:1
Overload 125% for 120s – 150% for 30s
Output sockets terminal terminals + No. 2 IEC 320 (10A) for local networks
System S5P-6000 S5P-6500 S5P-8000 S5P-10000
Transfer time 0ms (<10ms Eco Mode)
AC-AC efficiency 92% 91% single-phase, 92% three-phase (98% Eco Mode)
Batteries (No./V/Ah) 18/12/7 30/12/7
Battery recharging time 6-8 h
Communication port RS232 + Communication Slot (TCP/IP, HTTP,SNMP, JBUS, MODBUS, PROFIBUS)
Remote control Emergency Power Off
Protection overcurrent – short circuit – excessive battery discharge – overvoltage
undervoltage - overtemperature
Noise at 1 m <40 dBA
Operating temperature 0÷40 °C, optimal for batteries +15÷+25°C
Humidity 90% non-condensing
Standards safety EN 62040-1, EMC IEC 62040-2 and EN 50091-2 lev. A, Directives 73/23,
93/68, 89/336 EEC, EN 62040-3
52