Specifications

Four operating modes
• On Line (VFI)
The load is powered by the Inverter
and the output power supply is
independent from the input supply
voltage and frequency fluctuations.
• Eco Mode
To optimise the efficiency the load is
powered from the mains as preferred
source. If the mains voltage exceeds
the tolerance values, the UPS switches
to the normal ON LINE double
conversion operating mode.
• Smart Active
When the power supply quality is very
unstable of course the user is unable to
define which is the best operating
mode between On line or ECOMode.
Smart Active function solves this
problem as it selects the best operation
mode depending on the input power
quality.
• Stand-by-off
When mains power is available the
UPS will not power the load; when
mains is not available the UPS will
power the load using the battery power
supply. This feature makes the UPS
ideal for emergency lighting power
supply.
Advanced diagnostics
A backlit display provides the most
important measurements relating to the
UPS.
Extending the back-up time
Battery expansion is envisaged to
increase the back-up time of the UPS.
Battery chargers can be used to
reduce recharging times.
Programmable output socket
Using UPSTools configuration software
it is possible to set the cut-off
sequence of the output sockets. It is a
very important feature in emergency
conditions to be able to classify the
loads by different priorities.
Manual By-Pass
The By-pass provides the possibility of
excluding a UPS for maintenance
without any interruptions or
disturbances of the load supply.
Applications
Servers, Local Area Networks (LAN),
data centers, telecommunications,
Industrial equipment, electro-medial
equipment, Emergency Lighting.
Display LCD custom
SUITABLE FOR
EMERGENCY LIGHTING
APPLICATIONS
Manual By -pass 16A