Specifications

Rapido
Safety and simplicity of use
Rapido is a range of multi-socket UPS
systems recommended to power
electrical loads in IT environments such
as computers, video terminals, printers
and various accessories. Available from
350VA to 550VA, Rapido comes with 1
IEC 320 input socket (complete with
fuse), 4 Schuko output sockets, 1
telephone line socket, 1 USB socket
and 3 signalling LEDs. Three Schuko
output sockets are connected to the
internal batteries which, in the event of
a mains blackout, are able to power the
electrical loads connected to them for
long enough to allow the correct
shutdown. The purpose of the
remaining output socket is to attenuate
any electrical interference on the mains.
Rapid installation, robustness and
attractive design
Rapido is suitable for floor installation or
can be wall mounted by means of
screws (not supplied).
Rapido is very robust and has an
attractive design, making it suitable for
use in professional environments or in
the home.
Replacing the batteries
A simple and fast procedure is all it
takes to replace spent or inefficient
batteries inside the UPS.
Advanced communication
The “Watch&Save” software provided
ensures effective and intuitive
management of the UPS. The most
important information such as the input
and output voltage, the load applied or
any faults, is displayed in the form of
bar graphs.
Start-up/shutdown programming
The “Watch&Save” software can be
used to programme the fully automatic
start-up and/or shutdown of the UPS.
Automatic restart
Following an extended power failure
causing the UPS to shut down due to
the end of the internal batteries back-
up time, Rapido will restart
automatically when the mains power
supply returns.
Protection of the telephone line
Rapido comes with an RJ45/RJ11
telephone socket to guarantee the
protection of its telephone line/modem
from any mains overvoltages.
Applications
Personal computers and peripherals,
TV, Hi-Fi, DVD, phone, fax, modem.
28