Specifications

96
Software and accessories for total reliability
in controls and communication
The MultiCom 301/302 protocol converter may be used to monitor the UPS
using the MODBUS/JBUS protocol on RS485 or RS232 serial lines. It can
also manage a second, independent RS232 serial line that can be used to
connect other devices such as the Netman Plus 101 or a PC that uses the
Watch&Save 3000 software.
CHARACTERISTICS
• Port configuration for MODBUS/JBUS as RS232 or RS485
• Management of two independent serial lines
• Suitable for Building Management System (BMS) integration
• LED communication flow indicators
• Firmware upgradeable through the serial port
MultiCom 301
MultiCom 302
MultiCom 301/302 - Protocol converter
The MultiCom 351/352 is a serial duplexer that allows two devices to be
connected to a single serial port on a UPS.
It can be used where numerous serial connections and multiple UPS polling
are required, and is ideal for LAN networks with a firewall.
CHARACTERISTICS
• Cascading configuration giving a maximum of 4 serial communication ports
• LED communication flow indicators
• Firmware upgradeable through the serial port
MultiCom 351
MultiCom 352
MultiCom 351/352 - Serial link duplexer
MultiCom 362 provides a UPS with an additional RS232 serial interface or
USB port. The USB port allows the UPS to communicate with Apple
Macintosh computers as well as Windows and Linux operating systems.
CHARACTERISTICS
• Compatible with USB 1 or 2
• Compatible with Watch&Save 3000
MultiCom 362
MultiCom 362 - Serial / USB port