Daim Ntawv Qhia Tus Neeg Siv

6
Pair to your Phone or other Bluetooth device
Once the speakers have connected for wireless stereo, they’re ready to pair to
your phone or other Bluetooth device (one of the speakers announces “Pairing”).
Make sure your phone’s Bluetooth is turned. Then go its Bluetooth menu and
choose “AROM10.” The speaker announces “Connected” when it’s connected to
your phone or other Bluetooth device.
To start streaming music to the speakers: Start playing music on your phone or
other Bluetooth device.
To control volume: Use the volume controls on your phone or other Bluetooth
device.
How to reset the speakers
If you’re having trouble getting the speakers to connect to each other or pair
to your device, you can reset them to their factory defaults and start the setup
process again.
To reset the speakers:
1. Make sure both speakers are turned off. (To turn them off, press and hold
the Power/Pair button on the back of the speaker.)
2. On one of the speakers, press and hold the Power/Pair button on the back
for 6 seconds until the speaker says “Pairing.”
3. On that same speaker, give a quick double press of the Power/Pair butotn
on the back of that speaker. The speaker emits a double beep.
4. On the other speaker, press and hold the Power/Pair button on the back for
6 seconds until the speaker says “Pairing.”
After several seconds, the speakers will announce “left connected” and
“right connected.” Soon after, one of the speakers will announce that they
are ready to pair with your phone. Follow the steps above for pairing your
phone or other Bluetooth device with the speakers.