Daim Ntawv Qhia Tus Neeg Siv

4. Mount the brackets to the

screws.

Place each bracket on the screw heads and pull

down to lock them into place.

Set Up the Speakers

Power/Charge the Speakers

Open the DC In flap on the back of each speaker to

access the power jack. Plug one end of a power adapter

into the power jack. Plug the other end into a working

power outlet or power strip.

Note: The power extension cables provided extend the

reach of your power adapter cable by 6 feet. Simply

connect one end to the power jack on the speaker and

the other end to the end of the power adapter cable.

The charging indicator next to the power jack turns red

while the speaker is charging. It turns green when the

speaker is fully charged.

Turn On the Speakers

Press and hold the Power/Pair button on the back of

each speaker to turn it on. The speakers automatically

connected to each other for wireless stereo when they’re

both power on (they announce “Left Connected” and

“Right Connected).

Flap open

Power jack

Charging indicator

Speaker back panel

Note: If the speakers don’t pair stereo automatically, give a quick double-press to

the Power/Pair button on the back of one of the speakers to reconnect wireless

stereo.

IMPORTANT: It’s important to know which speaker is left and right so that you

mount them correctly. If you forget, look at the indicators on the front of the

speaker—the indicator on the left speaker blinks every 10 seconds when it’s

connected to the other speaker.