Daim Ntawv Qhia Tus Neeg Siv

4
Mount the Speaker Brackets
1. Remove the brackets from
each speaker.
Unscrew the bracket locks on the top and bottom
of each speaker. Remove the bracket locks and the
brackets as shown here.
2. Mark speaker placement on
the wall.
Place each bracket on the wall where you plan to
mount each speaker. Use a pencil to mark the wall
through the top and bottom keyhole slots on the
brackets.
What kinds of screws should you use?
If you are mounting to wood studs (behind
drywall, for example): Use Truss-head #8 x 1”
(4mm x 25mm) wood screws.
If you are not mounting to wood studs: Use Truss-
head #8 x 1” (4mm x 25mm) screws and anchors.
3. Mount the screws to the
wall.
Use an 1/8” drill bit to drill pilot holes in the
wall where you marked. If you’re using anchors,
insert them in each hole so that they’re flush
with the wall. Screw in all 4 screws so that the
screw heads are an 1/8” away from the wall.