Instructions / Assembly

PACKAGE CONTENTS
Quick Start GuideQuick Start Guide
AROFLY is designed to work when installed on the REAR cycle valve, Will only work when both cycle
wheels are touching the road surface at the same time, moving forward with pedal action by the cyclist.
Quick Start GuidePackage Box
AROFLY Sensor
(CR1632 Battery Included)
Tool (Wrench)Valve Adaptor
AROFLY FLEXI-HOLD
(Smart Phone Holder)
INSTALLING AND SETTING
•Download the latest APP "AROFLY" on Smart Phone
•Switch ON BLUETOOTH on Smart Phone
Please download AROFLY APP on your Smart Phone AROFLY APP, supports iOS &
Android formats.
How to download
1. You may search for the word "AROFLY" in APP Store or Google Play.
2. Scan QR code from the sides of package box or from this manual as shown on the right.
iOS Android
Arofly APP icon
Place Wrench onto the AROFLY
Base. Twist counter-clockwise
to open AROFLY Cap.
Pull and remove Insulation
Tab from AROFLY to connect
battery. Replace the cap to
AROFLY.
Touch AROFLY icon to open
APP.
It will Automatically go to the
"Setting Page" when signing in
for the first time. ALL fields in
RED MUST be filled in correctly.
Touch "Select AROFLY Device"
Gently tap the AROFLY few
times to wake up. It will
automatically search for a
Bluetooth connection on your
Smart phone.
AROFLY is paired only when
it shows a code, for example,
AROFLY XXX.. Touch this Code
to complete pairing. You must
see this number to register.
iOS screen Android screen
Select Bicycle: There are 3 options: a. Road
Bicycle, b. Mount Bicycle, c. Small Wheel.
For data accuracy, please select the correct
type of bike..
Continue to fill in the remaining
fields till complete.
RESTORE
When "Restore Default Setting",
is selected, it will reset ALL your
settings to Factory Default.
Touch upper left corner of the
menu sign or Slide screen to
Right to go back to MENU.
Select "Home" to go to the
main page.
BLUETOOTH indicator ON
(right top corner on main page)
AROFLY Battery indicator ON
Both indicators MUST show a
bright light, this means pairing
and Bluetooth connections are
successful.
If it is a Schrader valve, AROFLY can
be installed directly onto the rear
valve (no need for any adaptor).
If it is a Presta valve, please
loosen "the valve pin" to the
top-end of the Presta valve
shaft.
Install "Valve Adaptor" on
Presta valve.
Ensure the correct side of the
Adaptor to the Valve.
Twist Adaptor firmly on the
Presta valve.
Install AROFLY on the Adaptor.
INSTALLING AROFLY ON CYCLE REAR VALVE ONLY
PREPARING TO INSTALL AROFLY SENSOR
QR code for AROFLY
Quick Start Guide video
Insulation Tap
Pairing & Bonding AROFLY with APP
on Smart Phone (ensure Bluetooth is
ON)
Be sure to twist tightly to avoid
air leakage, and to ensure
good contact with valve pin.
Be sure to twist tightly to avoid
air leakage, and to ensure
good contact with valve pin.
Select Arofly Device