Replacement Part List
www.arnoldparts.com
CHECK OUT OUR ONLINE HOW-TO VIDEOS
AND TAKE THE GUESSWORK OUT OF
EQUIPMENT MAINTENANCE!
¡CONOZCA NUESTROS VIDEOS DE
INFORMACIÓN PRÁCTICA EN LÍNEA Y
LÍBRESE DE LAS DUDAS SOBRE EL
MANTENIMIENTO DEL EQUIPO!
645-81700
490-241-0049
REPLACES O.E. / REEMPLAZA E.O.
108-4884
490-241-0049
SHAVE PLATE
FITS 21" POWER CLEAR
®
SINGLE-STAGE SNOW THROWERS
CAUTION:
Disconnect spark plug wire and ground against the engine
to prevent unintended starting before performing any repairs
or maintenance.
HOW TO INSTALL:
1. Remove spark plug using spark plug wrench.
2. Tip the unit forward so it rests on the front housing.
3. Remove the springs.
4. Remove the two bolts that secure the shave plate.
5. Remove the old shave plate.
6. Put new shave plate in place and secure with the two
new bolts and locknuts included.
7. Reinstall the two springs, hooking them onto the shave
plate and then the frame.
8. Tip unit back onto its operating position.
9. Reinstall spark plug and reconnect spark plug wire.
PLACA ALISADORA
PARA BARREDORAS DE NIEVE DE UNA ETAPA POWER CLEAR
®
DE 53.3 cm
PRECAUCIÓN:
Antes de realizar cualquier tarea de reparación o de mantenimiento, desconecte
el cable de bujía y conéctelo a masa en la estructura del motor a n de prevenir
un arranque accidental.
CÓMO INSTALAR:
1. Quite la bujía con una llave para bujías.
2. Incline la unidad hacia adelante para que descanse en la carcasa delantera.
3. Retire los resortes.
4. Retire los dos pernos que sujetan la placa alisadora.
5 . Retire la placa alisadora vieja.
6 . Coloque la nueva placa alisadora y sujétela con los dos nuevos pernos
y tuercas de seguridad incluidos.
7 . Vuelva a instalar los dos resortes, enganchándolos en la placa alisadora
y luego el marco.
8 . Vuelva la unidad a su posición de funcionamiento.
9. Vuelva a instalar la bujía y vuelva a conectar el cable de bujía.
SHAVE PLATE
PLACA ALISADORA
FOR / PARA
TORO
®
FITS 21" POWER CLEAR
®
SINGLE-STAGE SNOW
THROWERS
INCLUDES: 2 BOLTS AND LOCKNUTS
PARA BARREDORAS DE NIEVE DE UNA ETAPA
POWER CLEAR
®
DE 53.3 cm
INCLUYE: 2 PERNOS Y TUERCAS DE SEGURIDAD
REPLACES O.E. / REEMPLAZA E.O.
108-4884
305 Manseld Ave.
Shelby, OH 44875
www.arnoldparts.com
C.O.O.: U.S.A.
PAÍS DE ORIGEN: EE. UU.