How to Guide

4. Insert poles G, narrow end up, into A end of both A/B

assemblies. Insert set screw (S) into top of bars A,

securing in  nger-tight.

Front

Back

5. Place curved bar C on  at surface, nuts facing up.

Insert the labeled end of curved bar D into C (making

sure arrows meet). Repeat with the other bar D on the

opposite end of bar C. Insert set screw (S) into ends of

bars C, securing in  nger-tight.

7. Make sure cab frame is in the shape of a box, with

right angles. Then tighten all the set screw (S), using

the enclosed Allen wrench.

6. Place assembly D/C/D onto ends of poles G. Insert

set screw (S) at top of poles G, securing in  nger-tight.

NOTE: Make sure set screws are facing towards

the front.

Front

Back