MSDS

Armstrong World Industries, Inc.
2500 Columbia Ave.
Lancaster, PA, U.S.A., 17603
Telephone: [phone]
S-325 New Beginning Extra-Strength Cleaner and Wax Remover
S-325
Page 5 of 7
MSDS Revision Date (mm/dd/yyyy): 01/05/2011
: Synergistic materials
Not available.
None known or reported by the manufacturer.
other important hazards
:
Conditions aggravated by overexposure
Pre-existing skin, eye and respiratory disorders.
:
Ecotoxicity
:
No data is available on the product itself. The product should not be allowed to enter drains
or water courses, or be deposited where it can affect ground or surface waters.
SECTION 12 - ECOLOGICAL INFORMATION
Mobility
No data is available on the product itself.
:
Persistence
No data is available on the product itself.
:
Bioaccumulation potential
No data is available on the product itself.
:
Other Adverse Environmental effects
No data is available on the product itself.
:
Handle waste according to recommendations in Section 7. Empty containers retain residue
(liquid and/or vapour) and can be dangerous.
:
Handling for Disposal
SECTION 13 - DISPOSAL CONSIDERATIONS
Dispose of in accordance with federal, provincial and local hazardous waste laws.
:
Methods of Disposal
SECTION 14: TRANPORT INFORMATION
Regulatory
Information
UN Number
Shipping Name
Class
Packing
Group
Label
Consumer Commodity
ORM-D
49CFR/DOT
None
None
Must be a consumer-type product, in Limited Quantity size, no larger than 5.0 L per container. Package
weight must not exceed 30 kg gross.
Additional
information
49CFR/DOT
CORROSIVE LIQUID, N.O.S. (Sodium
metasilicate; Monoethanolamine)
8
TDG
UN1760
III
May be shipped under Section 1.17 when packages are marked "Consumer Commodity" Must be a
consumer-type product, in Limited Quantity size,
no larger than 5.0 L per container. Package weight must
not exceed 30 kg gross.
Additional
information
TDG
SECTION 15 - REGULATORY INFORMATION
Labelling:
Danger. Corrosive liquid. Prolonged contact may cause corrosive burns and eye damage. May be fatal if too much is inhaled.
Harmful or fatal if absorbed through the skin. Severe respiratory irritant Could result in pulmonary edema (fluid accumulation).
Repeated absorption may cause disorder of central nervous system, liver, kidneys and blood.
Precautions: Use in a well-ventilated area. Wear suitable protective equipment during handling. Do not breathe vapours or
spray mist. Avoid contact with skin, eyes and clothing. Keep away from extreme heat and flame. Keep away from incompatibles.
Store in a cool, dry, well ventilated area, away from heat and ignition sources.
FIRST AID: If inhaled, move to fresh air. If breathing stopped, begin artificial respiration. IF ON SKIN (or hair): Remove/Take
off immediately all contaminated clothing. Rinse skin with water/shower. For eye contact, flush with running water for at least 15
minutes. If ingested, do not induce vomiting. For all cases, obtain medical attention immediately.
Refer To Material Safety Data Sheet for further information.
Canadian Environmental Protection Act (CEPA) information: All ingredients listed appear on the Domestic Substances List
(DSL).
Canadian Information: