Submittal Sheet

Job:
Engineer:
Contractor:
Representative:
Order no.: Date:
Submitted by: Date:
Approved by: Date:
quantity tag no. part number flow (USgpm) head (feet) voltage phase comments
materials of construction
Pump body: Cast iron (closed sytems)
Bronze (lead free for open systems)
Face plate: Stainless steel Shaft: Stainless steel
Impeller: 30% Glass-filled noryl Volute gasket: epdm
Bearings: Permanently lubricated stainless steel
Seal: Silicon carbide enviroseal c/w viton elastomer
All Bronze Circulators are nsf – 372 rated
Performance curves are for reference only. Confirm current performance
data with Armstrong ace online selection software.
mounting orientation
for indoor use only
technical data motor data
part number performance curve
File No: 10.592
Date: july 25, 2018
Supersedes: 10.592
Date: june 05, 2017
0
(0)
(0.0) 0
(1.5) 5
(3.0) 10
(4.6) 15
(6.1) 20
(7.6) 25
(9.1) 30
(10.7) 35
(12.1) 40
(13.7) 45
20
(1.26)
40
(2.52)
60
(3.78)
80
(5.05)
100
(6.31)
120
(7.57)
140
(8.83)
flow - USgpm (L/s)
total head - feet (m)
recommended
optional
not recommended
Flow range: 0 to 38.0 USgpm (0 to 2.4 L/s)
Head range: 0 to 42.4 feet (0 to 12.9 m)
Max/Min fluid temp: 230°f/32°f (110°c/ 0°c)
Max. working pressure: 150 psi (1034 kPa)
Voltage 120v 208v 240v
Full load amp draw 2.0a 1.0a 1.0a
Nominal power: T hp (125w) Frequency: 60 Hz
Motor type: Two pole, Single phase Speed: 3250 rpm
e9.2/e9.2b accessories
120v 240v
e9.2 182202–659 182202–647
e9.2b 182202–660 182202–648
• ¾" Flange kits
• 1" Flange kits
• 1¼" Flange kits
• 1½" Flange kits
• Timer
• Aquastat
E.2 SERIES CIRCULATORS
E9.2/E9.2B
SUBMITTAL