Submittal Sheet

SUBMITTAL
JOB:
ENGINEER:
CONTRACTOR:
REPRESENTATIVE:
ORDER NO:
SUBMITTED BY:
APPROVED BY:
DATE:
DATE:
DATE:
STANDARD CIRCULATORS Series “S”
Page 1 of 2
FILE NO: 10.50
DATE: July 25, 2012
SUPERSEDES: 10.50
DATE: June 14, 2011
PUMP DESIGN DATA
Pump Model: Flange Size:
No. of Pumps:
Note:
Capacity: USgpm (I/s) Temperature: ºF (ºC)
Head: ft. (m) Liquid:
Companion Flanges Included
OPTIONAL EQUIPMENT
Performance curve See pg. 2
Maximum Working Pressure: 125 Psig 863 (kPa)
Maximum Operating Temperature: 225 ºF (107 ºC)
MATERIALS OF CONSTRUCTION
PART NAME BRONZE FITTED ALL BRONZE LEAD FREE BRONZE*
Pump Body Cast Iron Bronze Lead free Bronze
Impeller Non-Ferrous
Bearings Sleeve-Oil Lubricated
Shaft Alloy Steel-Copper Sleeve
Seal Mechanical
Stationary Seal Face Sintered Silicon Carbide
Coupler
S25-S46:Flexible, 4 - Spring;
S55-S69:Flexible Spacer Type
Motor
Single Phase - 1800 RPM - Resilient Mounted
Three Phase - 1800 RPM - Resilient Mounted
* Contains less than 0.25% lead, weighted average
DIMENSIONAL DATA
MODEL
FLANGE
SIZE
(N.P.T.)
MOTOR** DIMENSIONS Inches (mm)
WEIGHT
lbs (kg)
H.P. PHASE & VOLT A B C D
S-25
3/4
1/12
1 Phase 115 V
13-3/4 (349) 6-1/2 (165) 11-1/2 (292)
3/4 (19)
20 (9.0)
1 3/4 (19)
1-1/4 7/8 (22)
1-1/2 7/8 (22)
S-35 2 1/6 15 (581) 8-1/2 (216) 12-1/2 (318) 7/8 (22) 35 (16.0)
2-1/2
1/4 15-3/4 (400) 10 (254) 12-1/2 (318) 1 (25) 51 (23.0)
3
S-46 3 1/3 15-3/4 (400) 10 (254) 12-1/2 (318) 1 (25) 51 (23.0)
S-55 3 1/2
1 Phase 115/230 V or 3 Phase
208-230/460 or 575 V
19-1/2 (495) 12 (305) 16 (406) 1 (25) 82 (37.0)
S-57 3 3/4 20 (508) 12 (305) 16-1/2 (419) 1 (25) 85 (39.0)
S-69 3 1 25 (635) 14-1/4 (362) 20 1/4 (514) 1 (25) 135 (61.0)
S-45
Dimensions shown are for reference only. For exact dimensional data, contact factory.
** All single phase motors are equipped with a built-in thermal overload protection. Three phase motors require external overload protection.
Conduit box not supplied on ½ hp or greater.