Replacement Parts List

FILE NO.: 6010.201
DATE: September 17,2013
SUPERSEDES: 6010.201
DATE: February 05,2013
ITEM PART NUMBER
NO.
28 BODY GASKET 106158-000
12 BRACKET HOUSING (2) 816966-111
8 COUPLER ASSEMBLY (Flexible) 1 PHASE 1/2X1/2 807436-000
8 COUPLER ASSEMBLY (Flexible) 3 PHASE 1/2X5/8 806137-000
0 COUPLER INSERT 875000-800
22 FACEPLATE 174003-071
3 FLANGE - 2" NPT - BRONZE 106074-041
5 FLANGE BOLTS - 1/2-13X2 1/4 911125-120
4 FLANGE GASKET 116117-000
11 FLANGE NUTS - 1/2-13 913125-118
2 IMPELLER - 5 1/4" DIA. (See note 4) 816304-317
2 IMPELLER - 4 3/4" DIA. (See note 4) 816304-321
2 IMPELLER - 4" DIA. (See note 4) 816304-327
23 IMPELLER KEY (WOODRUFF #2) 974507-100
27 IMPELLER NUT 106076-000
26 IMPELLER WASHER 927311-700
15 MECHANICAL SEAL ASSEMBLY 816706-021
7 RESILIENT MTD. MOT. ASSY. - 1PH/1/3HP/115/230V 816141-002
7
RIGID MOUNT. MOT. ASSY. - 3PH/1/3HP/208/230/460V (6) 830590-083
7
RESILIENT MTD. MOT. ASSY. - 1PH/1/2HP/115/230V 811757-001
7
RIGID MOUNT. MOT. ASSY. - 3PH/1/2HP/208/230/460V (6) 831011-083
7
RIGID MOUNT. MOT. ASSY. - 3PH/1/2HP/575V (6) 831011-083
7
RESILIENT MTD. MOT. ASSY. - 1PH/3/4HP/115/230V 811757-002
7
RIGID MOUNT. MOT. ASSY. - 3PH/3/4HP/208/230/460V (6) 831012-083
7
RIGID MOUNT. MOT. ASSY. - 3PH/3/4HP/575V (6) 811757-006
7
RESILIENT MTD. MOT. ASSY. - 1PH/1HP/115/230V 811757-007
7
RIGID MOUNT. MOT. ASSY. - 1PH/1HP/115/230V (6) 816676-062
7
RIGID MOUNT. MOT. ASSY. - 3PH/1HP/208/230/460V (6) 816676-069
7
RIGID MOUNT. MOT. ASSY. - 3PH/1HP/575V (6) 811757-009
10 MOTOR CAPSCREWS - 3/8-16X3/4 911121-106
17 O RING - MODULE 961131-036
18 O RING - REAR BEARING 961131-024
19 O RING - SHAFT 961131-013
24 OIL SEAL 116975-000
21 OIL WICK (BRIDGE) 116949-000
20 OIL WICK (ROUND) 116948-000
1 PUMP BODY 816338-041
9 PUMP BODY CAPS. - 5/16-1/8x3/4 911123-108
29 SEAL BEARING ASSEMBLY (1) 816032-000
16 SHAFT AND BEARING MODULE (3) 816999-041
NOTES: (1) Seal Bearing Assembly includes Bearing Bracket, Body Gasket, Standard 106076-000 Impeller Nut,
Standard 927411-700 Impeller Washer, Module, Impeller Key, "Armite" Seal Assembly,
Sintered Silicone Carbide Seal Seat,Viton "L" (retainer) Cup, and 1/2 Ounces of Oil.
(2) Includes Face Plate and Buna "N" Oil Seal
(3) Includes Front Sleeve Bearing, Shaft and Sleeve Assembly, two Oil Wicks, three "O" Rings,
rear Sleeve Bearing Assembly, four Mounting Screws, Impelller Key, "Armite" Seal Assembly,
Sintered Silicone Carbide Seal Seat,Viton "L" (retainer) Cup, and 1/2 Ounces of Oil.
(4) Impeller Part Numbers are for stock diameter Impellers. For Impeller Diammeters not listed, please contact the
factory.
(5) For TEFC or Explosion Proof Motors, contact the factory.
CIRCULATOR PARTS
BAR CODE
MODEL NUMBER 1050 2B - SIZE 5 Serial No. 6208 & Later
ALL BRONZE CONSTRUCTION
DESCRIPTION ARMSTRONG
Circulator Parts List 80 of 113