Replacement Parts List

FILE NO.: 6010.201
DATE: September 17,2013
SUPERSEDES: 6010.201
DATE: February 05,2013
ITEM
NO.
28 BODY GASKET
12 BRACKET HOUSING
(2)
8 COUPLER ASSEMBLY (4 - Spring) 806026-001
22 FACEPLATE 116077-071
3 FLANGE - 3/4" NPT - CAST IRON 116013-011
3 FLANGE - 1" NPT - CAST IRON 116012-011
3 FLANGE - 1 1/4" NPT - CAST IRON 116011-011
3 FLANGE - 1 1/2" NPT - CAST IRON 116009-011
5 FLANGE BOLTS - 7/16-14X1 1/2 911123-112
4 FLANGE GASKET 816653-000
11 FLANGE NUTS - 7/16-14 JAM 911123-112
2 IMPELLER 812961-111
23 IMPELLER KEY (WOODRUFF #2) 974507-100
27 IMPELLER NUT 913171-100
26 IMPELLER WASHER 927311-100
15 MECHANICAL SEAL ASSEMBLY 816706-021
7
RESILIENT MTD. MOT. ASSY. - 1PH/1/12HP/115V
805316-010
10 MOTOR CAPSCREWS - 1/4-20X5/8 911117-105
17 O RING - MODULE 961131-036
18 O RING - REAR BEARING 961131-024
19 O RING - SHAFT 961131-013
24 OIL SEAL 116975-000
21 OIL WICK (BRIDGE) 116949-000
20 OIL WICK (ROUND) 116948-000
1 PUMP BODY 805482-011
9 PUMP BODY CAPSCREWS- 3/8-16X7/8 911121-107
29 SEAL BEARING ASSEMBLY
(1) 810119-001
16 SHAFT AND BEARING MODULE
(3) 816999-071
NOTES:
(1) Seal Bearing Assembly includes Bearing Bracket, Body Gasket, Standard 812961-111 Impeller,
Standard 106076-000 Impeller Nut, Standard 927411-700 Impeller Washer, Module, Impeller Key,
"Armite" Seal Assembly, Sintered Silicone Carbide Seal Seat, Buna "L" (retainer) Cup, and 5/8 Ounces of Oil.
(2) Includes Face Plate and Buna "N" Oil Seal
(3) Includes Front Sleeve Bearing, Shaft and Sleeve Assembly, two Oil Wicks, three "O" Rings,
rear Sleeve Bearing Assembly, four Mounting Screws, Impelller Key, "Armite" Seal Assembly,
Sintered Silicone Carbide Seal Seat, Buna "L" (retainer) Cup, and 5/8 Ounces of Oil.
816958-111
DESCRIPTION ARMSTRONGPART NUMBER
104442-000
BAR CODE
CIRCULATOR PARTS
MODEL NUMBER S25 - SIZE 2 - Serial No. 6205 & Later
STANDARD AND BRONZE FITTED CONSTRUCTION
Circulator Parts List 4 of 113