Replacement Parts

FILE NO.: 6010.201
DATE: September 17,2013
SUPERSEDES: 6010.201
DATE: February 05,2013
ITEM PART NUMBER
NO.
28 BODY GASKET 106049-000
12 BRACKET HOUSING
(2) 816961-111
8 COUPLER ASSEMBLY
(4 - Spring) 806026-001
22 FACEPLATE 109522-071
3 FLANGE - 2" NPT - CAST IRON 105210-011
5 FLANGE BOLTS - 1/2-13X2 1/4 911123-114
4 FLANGE GASKET
(1990 & Later) 105209-002
4 FLANGE GASKET
(Prior to 1990) 105209-000
11 FLANGE NUTS - 1/2-13 913125-100
2 IMPELLER (Steel)
(4) 816322-011
23 IMPELLER KEY (WOODRUFF #2) 974507-100
27 IMPELLER NUT 106076-000
26 IMPELLER WASHER 927311-700
15 MECHANICAL SEAL ASSY. (Viton)
(5) 816706-023
7
RESILIENT MTD. MOT. ASSY. - 1PH/1/6HP/115V
817025-001
10 MOTOR CAPSCREWS - 5/16-18x1 911118-108
17 O RING - MODULE 961131-036
18 O RING - REAR BEARING 961131-024
19 O RING - SHAFT 961131-013
24 OIL SEAL 116975-000
21 OIL WICK (BRIDGE) 116949-000
20 OIL WICK (ROUND) 116948-000
1 PUMP BODY 816327-011
9 PUMP BODY CAPSCREWS - 7/16-14x1 911123-108
29 SEAL BEARING ASSEMBLY
(1) & (5) 810119-003
29 SEAL BEARING ASSEMBLY
(5) & (6) 816549-091
16 SHAFT AND BEARING MODULE
(3) & (5) 816999-041
NOTES:
(1) Seal Bearing Assembly includes Bearing Bracket, Body Gasket, Standard 816322-111 Impeller,
Standard 106076-000 Impeller Nut, Standard 927411-700 Impeller Washer, Module, Impeller Key,
"Armite" Seal Assembly, Sintered Silicone Carbide Seal Seat, Buna "L" (retainer) Cup, and 1/2 Ounces of Oil.
(2) Includes Face Plate and Buna "N" Oil Seal
(3) Includes Front Sleeve Bearing, Shaft and Sleeve Assembly, two Oil Wicks, three "O" Rings,
rear Sleeve Bearing Assembly, four Mounting Screws, Impelller Key, "Armite" Seal Assembly,
Sintered Silicone Carbide Seal Seat, Buna "L" (retainer) Cup, and 1/2 Ounces of Oil.
(4) The 816322-111 Impeller on the Universal SBA must be removed and replaced with a 816322-011 Impeller
(5) The 816706-021 Mechanical Seal on the Universal SBA and the Shaft & Bearing Module must be removed and
replaced with a 816706-023 Viton High Temperature Mechanical Seal.
(
6
)
Seal Bearin
g
Assembl
y
includes Bearin
g
Bracket, Bod
y
Gasket, 106076-000 Impeller Nut, 927411-000,
Module, Impeller Key, "Armite" Seal Assy., Ceramic Seal Seat, Buna "L" (retainer) Cup & 5/8oz. of Oil
BAR CODE
CIRCULATOR PARTS
MODEL NUMBER S35 - SIZE 3 - Serial No. 6509 & Later
HIGH TEMP. STANDARD CONSTRUCTION ( 225 - 275 DEG. F )
DESCRIPTION ARMSTRONG
Circulator Parts List 16 of 113