Replacement Parts

FILE NO.: 6010.201
DATE: September 17,2013
SUPERSEDES: 6010.201
DATE: February 05,2013
ITEM PART NUMBER
NO.
28 BODY GASKE
T
106049-000
12
BRACKET HOUSING
(2)
816961-111
8
COUPLER ASSEMBLY
(4 - Spring)
806026-001
22 FACEPLAT
E
109522-071
3 FLANGE - 1" NPT - BRONZ
E
106073-041
3 FLANGE - 1 1/4" NPT - BRONZE 104300-041
3 FLANGE - 1 1/2" NPT - BRONZE 104301-041
5 FLANGE BOLTS - 7/16-14X1 3/4 911123-114
4
FLANGE GASKET
(1990 & Later)
105176-000
4
FLANGE GASKET
(Prior to 1990)
104034-000
11 FLANGE NUTS - 7/16-14 JAM 913523-100
2
IMPELLER
(
Steel
)
(4)
816322-041
23 IMPELLER KEY
(
WOODRUFF #2
)
974507-100
27 IMPELLER NU
T
106076-000
26 IMPELLER WASHE
R
927311-700
15
MECHANICAL SEAL ASSY.
(
Viton
)
(5)
816706-023
7
RESILIENT MTD. MOT. ASSY. - 1PH/1/6HP/115V
817025-001
10 MOTOR CAPSCREWS - 5/16-18x1 911118-108
17 O RING - MODUL
E
961131-036
18 O RING - REAR BEARIN
G
961131-024
19 O RING - SHAF
T
961131-013
24 OIL SEA
L
116975-000
21 OIL WICK
(
BRIDGE
)
116949-000
20 OIL WICK
(
ROUND
)
116948-000
1 PUMP BOD
Y
816402-041
9 PUMP BODY CAPSCREWS - 7/16-14x1 911123-108
29
SEAL BEARING ASSEMBLY
(1) & (5)
810119-003
29
SEAL BEARING ASSEMBLY
(5) & (6)
816549-091
16 SHAFT AND BEARING MODULE
(3) & (5) 816999-041
NOTES:
(1) Seal Bearing Assembly includes Bearing Bracket, Body Gasket, Standard 816402-111 Impeller,
Standard 106076-000 Impeller Nut, Standard 927411-700 Impeller Washer, Module Impeller Key,
"Armite" Seal Assembly, Ceramic Seal Seat, Buna "L" (retainer) Cup, 5/8 Ounces of Oil.
(2) Includes Face Plate and Buna "N" Oil Seal
(3) Includes Front Sleeve Bearing, Shaft and Sleeve Assembly, two Oil Wicks, three "O" Rings,
rear Sleeve Bearing Assembly, four Mounting Screws, Impelller Key, "Armite" Seal Assembly,
Ceramic Seal Seat, Buna "L" (retainer) Cup, 5/8 ounces of oil.
(4) The 816322-111 Impeller on the Universal SBA must be removed and replaced with a 816322-041 Impeller
(5) The 816706-021 Mechanical Seal on the Universal SBA and the Shaft & Bearing Module must be removed and
replaced with a 816706-023 Viton High Temperature Mechanical Seal.
(
6
)
Seal Bearin
g
Assembl
y
includes Bearin
g
Bracket
,
Bod
y
Gasket
,
106076-000 Im
p
eller Nut
,
927411-000
,
Module, Impeller Key, "Armite" Seal Assy., Ceramic Seal Seat, Buna "L" (retainer) Cup & 5/8oz. of Oil
DESCRIPTION ARMSTRONG
BAR CODE
CIRCULATOR PARTS
MODEL NUMBER H32 - SIZE 3 - Serial No. 6509 & Later
HIGH TEMP. ALL BRONZE CONSTRUCTION ( 225 - 275 DEG. F )
Circulator Parts List 13 of 113