SDS

S-288 Premium Vinyl Sheet Flooring Adhesive
Safety Data Sheet
According to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
4/9/2015
EN (English US)
2/5
SECTION 5: FIRE-FIGHTING MEASURES
5.1. Extinguishing Media
Suitable Extinguishing Media: None required. Product is a water based material. Product will burn in a dry state. If needed use
foam, dry powder, carbon dioxide, water spray, sand.
Unsuitable Extinguishing Media: Do not use heavy water stream.
5.2. Special Hazards Arising From the Substance or Mixture
Fire Hazard: None
Explosion Hazard: None
Reactivity: Not reactive
5.3. Advice for Firefighters
Precautionary Measures Fire: Product is water based material. Will not ignite in the presence of fire. Product will burn on a dry
state.
Firefighting Instructions: Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire.
Avoid fire-fighting water to enter environment.
Protection During Firefighting: For fires in enclosed areas, wear self-contained breathing apparatus. Do not inhale combustion
gases.
Other Information:
SECTION 6: ACCIDENTAL RELEASE MEASURES
6.1. Personal Precautions, Protective Equipment and Emergency Procedures
General Measures: Always wear chemical resistant gloves, safety glasses, apron and boots if necessary to prevent contact.
6.1.1. For Non-emergency Personnel
Protective Equipment: Always wear chemical resistant gloves, safety glasses, apron and boots if necessary to prevent contact.
Emergency Procedures: Evacuate unnecessary personnel.
6.1.2. For Emergency Responders
Protective Equipment: Always wear chemical resistant gloves, safety glasses, apron and boots if necessary to prevent contact.
Emergency Procedures: Ventilate the area
6.2. Environmental Precautions
6.3. Methods and Material for Containment and Cleaning Up
For Containment: Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters.
Methods for Cleaning Up: Remove material and scrape residue from the area and contain in approved containers for proper
disposal.
6.4. Reference to Other Sections
SECTION 7: HANDLING AND STORAGE
7.1. Precautions for Safe Handling
Additional Hazards When Processed: Avoid contact with eyes. Avoid repeated contact with skin. Avoid breathing of vapors, if
any.
Hygiene Measures: Always wash skin after contact. Wash clothing before re-sue.
7.2. Conditions for Safe Storage, Including Any Incompatibilities
Technical Measures: Product is stable
Storage Conditions: Store adhesives in a well ventilated area.
Incompatible Products: strong bases and strong acids.
Storage Temperature: 65 degrees F – 95 degrees F
7.3. Specific End Use(s) Adhesive for the installation of vinyl backed flooring.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1. Control Parameters
8.2. Exposure Controls
Appropriate Engineering Controls
:
Use local exhaust. Do not use closed air-circulating. Open windows and doors if
necessary.
Personal Protective Equipment
:
Avoid all unnecessary exposure
Materials for Protective Clothing
:
Non porous material
Hand Protection
:
Wear chemical resistant gloves
Eye Protection
:
Chemical goggles or safety glasses
Skin and Body Protection
:
Use clothing to prevent skin and body contact
Respiratory Protection
:
Not necessary. NIOSH respirator if needed
Environmental Exposure Controls
:
None needed
Consumer Exposure Controls
:
Maintain proper ventilation, use protective equipment.