Technical Specifications

PRODUCT INFORMATION
Construction Vinyl Composition Tile
Product Line SDT
International Product
Specifications
ASTM F 1066 Class 2 – Through Pattern
Overall Thickness 1/8 in. (3.2 mm)
Wear Layer Thickness 1/8 in. (3.2 mm)
Finish Fast Start Factory Finish
Installation Full Spread Adhesives – S-202 Static Dissipative Tile Adhesive Required
Maintenance Options Polish – Armstrong S-392 Static Dissipative Polish Required
PACKAGING
Tile Sizes 12 in. x 12 in. (305 mm x 305 mm)
Tiles Per Carton 45 (45 sq. ft.)
Shipping Weight 63 lbs. (28.6 kg)
PERFORMANCE TEST METHOD MINIMUM REQUIREMENT
PERFORMANCE VS.
REQUIREMENT
ASTM F 1066
Thickness ASTM F 386 Nominal ± 0.005 in. Meets
Size ASTM F 2055 ± 0.016 in. per linear foot Exceeds
Squareness ASTM F 2055 0.010 in. max Exceeds
Indentation – One Minute ASTM F 1914 ≥ 0.006 in. to ≤0.015 in. Meets
Indentation at 115º F ASTM F 1914 < 0.032 in. Exceeds
Impact ASTM F 1265 No cracks beyond limit Exceeds
Deflection ASTM F 1304 1.0 in. minimum Exceeds
Dimensional Stability ASTM F 2199 ≤ 0.024 in. per linear foot Exceeds
Chemical Resistance ASTM F 925
No more than slight change in surface dulling,
attack or staining
Meets or Exceeds
Resistance to Heat ASTM F 1514 ΔE ≤ 8 Exceeds
Supplementary
Static Load Limit ASTM F 970 ≤ 0.005 in. 75 psi
Fire Test Data – Flame Spread ASTM E 648 0.45 watt/cm
2
or more Class I Meets
Fire Test Data – Smoke Evolution ASTM E 662 450 or less Meets
Regional Materials LEED
®
MR5.0 Meets Guidelines Meets
Recycled Content LEED MR4.0 Meets Guidelines Meets
Certified Low Emitting Product LEED EQ4.3 Meets Guidelines Meets
Certified Low Emitting Adhesive LEED EQ4.1 Meets Guidelines Meets
Indoor Air Quality FloorScore
™
Meets Certification Guidelines Certified
Indoor Air Quality CHPS 01350 Meets Certification Guidelines Certified
ELETRICAL PROPERTIES TEST METHOD PERFORMANCE
Resistance ANSI/ESD S7.1 ASTM F-150 Point to point and point to ground: 10
6
to 10
9
ohms
Resistance in Combination with a Person ANSI/ESD STM 97.1 At 12% R.H. with Dissipative footwear: 10
6
to 10
9
ohms
Static Generation ANSI/ESD STM 97.2
At 40% R.H. with Dissipative footwear: < 10 volts
At 12% R.H. with Dissipative footwear: < 10 volts
Static Dissipation ETS Dissipation At 12% R.H. with Dissipative footwear: 1000 to 100 volts: 0.2 seconds avg.
WARRANTY
5-Year Commercial Warranty when installed in accordance with Armstrong’s Guaranteed Installation Systems manual, F-5061.
LINKS
Installation Instructions – www.armstrong.com/pdbupimages/194606.pdf
Maintenance Information – www.armstrong.com/pdbupimages/197966.pdf
View the full line – www.armstrong.com/commflooringna/products/vct/static-dissipative-sdt/_/N-75hZ1z141xn
Email Techline – www.armstrong.com/commflooringna/contact_techline.jsp
www.armstrong.com/commercialflooring • 1 877 276 7876 ©2012 Armstrong World Industries, Inc.
SDT from Armstrong dissipates static charges to increase safety and prevent damage to sensitive equipment. The 4-part system includes
a special adhesive, copper grounding strips, SDT and S-392 Static Dissipative Polish. Armstrong S-202 SDT Adhesive, with copper
grounding strips, provides continuous static dissipation from tile to tile throughout the installation. Armstrong S-392 SDT Polish allows
regular maintenance to preserve the floor’s new-like appearance and provides a redundant static-control system that enhances the tile’s
electrical properties.
Static Dissipative Tile (SDT
™
)
Specialty Tile – Static Dissipative
Vinyl Composition Tile (VCT)