Technical Specifications

Weight

38 lbs/ctn (17.3kg/ctn)

Quantity per

Carton

Directions for Use

FLOOR PREP:

 Sweep or vacuum thoroughly

 Wash with Armstrong Once 'n Done Floor Cleaner (Do not use Once 'n Done on linoleum)

 Let dry

APPLYING POLISH:

 Apply a thin coat with a clean damp sponge mop or wax applicator

 Make sure the entire surface is coated

 Dries in approximately 30 minutes - no buffing necessary

ONGOING POLISHING:

 Reapply Shinekeeper Floor Polish as needed - 1 or 2 coats at a time

 If necessary, remove Shinekeeper with Armstrong New Beginning Floor Stripper & Cleaner. Note:

Armstrong New Beginning Floor Stripper & Cleaner can not be used on linoleum to remove

the Shinekeeper. Use a stripper with a pH level no higher than 10 on linoleum.

HOUSEHOLD HINT:

 In high humidity areas, Shinekeeper may take longer than 30 minutes to dry

NOTE: Do not reuse container. Dispose of container and residue in accordance with federal, state and local waste

disposal regulations. Do not flush Shinekeeper residue down drains.

Read label and MSDS carefully before use

Product Image