Technical Specifications

Items per Carton

1-gallon - 4/carton

4-gallon - 1/carton

Cartons per Pallet

1-gallon - 36

Substrates

For the following Commercial and Residential uses:

 As a primer with all Armstrong patches, underlayments and latex based adhesives.

 Can be used on all grade levels of concrete, poured in place gypsum underlayments, approved wood

underlayments, ceramic tile, quarry tile, terrazzo and marble.

 Primer for wood and concrete with self-adhering tile.

Installation Procedures

Floor Preparation

All surfaces must be clean and free of dirt, oil, grease,

plaster, curing compounds, adhesives* and other

foreign matter. Concrete floors must be free of excess

moisture and/or alkali.

Application

Apply S-185 liberally with a short nap paint roller or a

coarse fiber brush. Avoid puddling. Use full strength.

Do not dilute. Do not apply at temperatures below 32°F

(0°C) or above 100°F (38°C). Allow to dry thoroughly

before applying patches, underlayments or latex

adhesives. Drying time will vary with job site conditions.

Use this product with positive fresh air ventilation. A

slight odor of latex may be present until material dries.

Clean Up

Clean tools with water before material dries.

LEED / Environmental

LEED Credit Information - Installation and Maintenance Products

Warranty

When Armstrong S-185 is used with a recommended Armstrong floor application, the Armstrong Guaranteed Installation

System warranty applies.

Product Image