Instructions / Assembly

BEFORE YOU BEGIN:
• Store and install ceilings in areas with a temperature range of 60° to 85° F and not more than 70% relative humidity.
• Remove ceiling tile from cartons 24 hours before installation and allow to adjust to normal interior conditions of the
installation area.
• Do not apply loose fill or bat insulation so that it rests directly on the back of the tiles.
• Do not install ceiling tiles below embedded radiant-heat coils.
• Keep hands clean during tile installation to avoid fingerprints and smudges.
• Handle ceiling tiles carefully to protect the face and edges from damage.
• Always cut ceiling tiles face up with a sharp utility knife.
• For Adhesive Applications of mineral fiber only tiles directly to existing drywall or plaster ceilings: Ceiling tile
adhesive recommended, such as Henry 237 AcoustiGum
™
Acoustical Ceiling Tile Adhesive. Please follow adhesive
manufacturer’s instructions for application and usage. Armstrong does not guarantee the performance of this or other
adhesive products, either alone or in conjunction with Armstrong
®
products.
SAFETY TIPS:
• Establish and maintain adequate ventilation in the work area. If high dust levels are anticipated during installation, such
as with the use of power tools, take proper precautions.
• Wear long-sleeve, loose fiting clothing and gloves.
• Wear safety glasses to minimize the risk of eye injury.
• Use a sharp utility knife to ensure clean cuts. When not in use, store properly.
MAINTENANCE HINTS:
• This tile may be cleaned by lightly wiping with a sot, damp cloth, or by using a vacuum hose with a sot
brush atachment.
Do not scrub, immerse, or soak tiles in water or use soap.
TOOLS NEEDED TO INSTALL YOUR CEILING
How to install your 12" × 12" Ceiling Tile
using the Easy Up
®
Installation System
or Adhesive
Safety Glasses
Straight Edge
Hammer
Pencil
#6 Course Thread
Drywall Screws
4' Carpenter's
Level
Utility Knife
Stud Finder
Hacksaw
Dust Mask
Drill/Screw Gun
Gloves
Tin
Snips
String
Chalk
Line
Screw Driver
Lunettes de
sécurité
Ruban à mesurer
Règle à tracer
Marteau
Crayon
Vis pour gypse
à gros f ilet n° 6
Niveau à
bulle de 4 pi
Couteau
tout usage
Localisateur
de montant
Scie à métaux
Masque
antipoussières
Perceuse/Visseuse
Gants
Cisaille
à métal
Ficelle
Cordeau
à tracer
Tournevis
Gafas de
seguridad
Regla
Martillo
Lápiz
Nivel de
carpintero de
4 pies (1,2 m)
Cuchilla
multiuso
Localizador
de montantes
Segueta
Mascarilla contra
polvo
Taladro/Pistola
para tornillos
Guantes
Tijeras para
cortar metales
Cordel
Línea de
cuerda o
de tiza
Cinta para medir
Tornillo de rosca
gruesa no. 6 para
paneles de yeso
Destornillador
French
Tape Measure
Spanish