User's Manual

06 | OPERATING INSTRUCTIONS
LOADING WITH CARTRIDGES
Release the loading port and push cartridges into the
magazine tube. Repeat until magazine tube is full. (Figure 1)
(Figure 1)
PLACING THE CARTRIDGE ON
THE CARRIER
After placing the cartridges on to the carrier,
press the release latch. (Figure 2)
(Figure 2)
COCKING THE GUN
Pull the forend towards yourself to
move the cartridge into the barrel
and cock your shotgun. (Figure 3)
(Figure 3)
DISASSEMBLING THE SHOTGUN
To remove the forend turn the magazine cap part
counter-clockwise and remove the part. (Figure 4)
(Figure 4)
Remove the pump action forend upside parallel
to the barrel. (Figure 5)
(Figure 5)
Remove the forend by holding the
back the bolt action. (Figure 6)
(Figure 6)
Remove the pins on the receiver and remove the
cover by pulling it down. (Figure 7)
(Figure 7)
REMOVING THE CHOKE
Put the choke removing tool on the choke holes and turn the tool
towards counter-clockwise. (Figure 1). Turn the choke without the
tool with your fingers counter-clockwise until the choke is
removed from the barrel. (Figure 2)
(NOTE: To install the choke, turn the choke clockwise direction)
(Figure 1)
(Figure 2)
SEE FULL VIDEO TUTORIALS ON OUR
WEBSITE
SCAN QR