Manual

8. Insert the entire unit inside the receiver, shorter sleeve resting against the bolt
together with the receiver cap and compress the springs carefully to return the
receiver cap into its original position. Tighten the receiver cap lock screw.
9. Pull bolt handle back and forth several times to check the action of the bolt
and trigger assembly.
B.TRIGGER ASSEMBLY
1. With gun in an upside down position, insert trigger spring follower into the
trigger spring and mount it into the spring hole.
2. Insert the trigger, locating the catch of the rebound lever, with the rear catch.
3. Insert the trigger stop pin and pivot pin into their respective holes.
4. Squeeze trigger several times to check the action of trigger spring. (Pull bolt
handle back and forth several times to check the trigger release cocked firing
pin).
CAUTION:
The safety in your firearm is correctly designed, fitted and tested. However, any
mechanical device can fail. Never point your firearm at anything but a safe target and
never rely upon the safety to justify careless handling. USE HIGH VELOCITY .22
CALIBER LONG RIFLE CARTRIDGES ONLY.
When loading, pull bolt handle fully rearward and allow it to snap forward sharply.
Breech area and magazine should be cleaned thoroughly.
SPECIFICATIONS
Model 16.22 LR Semi- automatic Rifle
Barrel Length 18 inches
Weight 6.5 lbs.
Overall Length: 38.375 inches
Magazine Capacity: 15 rounds
Sights Fixed Peep Rear Sight; Post Sight
Stock: Black Finish wood
Page 4 of 9