E120 USER GUIDE For models QI0120 & QI0122 1
Contents Important safety information and warnings Important safety information and warnings..........................3 Introduction......................................................................5 Package contents............................................................5 Feature summary..............................................................6 Connecting the system and powering on...........................7 Operating E120 using the front panel................................
Introduction 2.5 Servicing Servicing is required when the unit or mains cord has been damaged in any way, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, it does not operate normally, or has been dropped. Refer all servicing to qualified service personnel. 3.
Connecting the system and powering on E120 is supplied with all the cables and wall box to fully install the system. Please refer to the ‘E120 installation manual’ which provides all details on the positioning and cable requirements of the system. Physical connectivity: 1 x Power supply extension cable 1 x Indoor DAB antenna 2 x 7m speaker cable 6 x Rubber grommets + 1 x extraction tool 1 x Antenna extension cable + adaptor E120 E120 INSTALLATION GUIDE USER GUIDE 1.
Switching on: 7. ENTER – Press to select a menu item, selected radio station, scan to the next FM station or play / pause Bluetooth audio. The first time E120 is powered on it will automatically perform a ‘BestTune scan’ which will take a couple of minutes. If a suitable DAB / FM antenna is connected, E120 will scan and store all available DAB and FM stations, providing one combined list with the best band option for each station. 8. ALARM – Press to enter the alarm setup. 9.
Radio Bluetooth audio E120 includes a DAB+ and FM band tuner. It uses a feature called ‘BestTune’ which combines a list of scanned DAB and FM stations together, giving a very easy and convenient method for the user to simply select the desired station, without the need to make any manual tuning. This feature can be switched off in the settings menu, which will then present a separate DAB and FM tuner source.
Setting an alarm Language You can set two independent alarms on E120. Each alarm can be set to occur only once, weekdays, weekends or all days. You can set the sound to a radio station or alarm, as well as set the duration and volume. E120 supports a number of languages for the menu, you can select these from the main menu: 1. 2. 3. 4. 1. 2. 3. 4. 5. Press ALARM. Use >I to select Alarm 1 or Alarm 2 then press ENTER. Press ENTER to turn alarm ON.
Specification Audio Sources Warranty DAB / DAB+ / FM with RDS F-connector Bluetooth Wireless BT 5.0 A2DP 3.5mm stereo Sensitivity: 350mV AUX: - Analogue Misuse and fair wear and tear are not covered by warranty. Max level: 1.5V Impedence: 10k ohm - Optical Audio Outputs mini TOSLINK Resolution: 16bit 48kHz Speaker outputs Left & Right Stereo or dual mono Analogue line 3.5mm stereo Modes: Fixed or variable Max level: 670mV Amplifier Class D Continuous power 2 x 25W @ 6ohm THD 0.
QACO US T ICS . CO .
