User's Manual
WWW.WARSENSOR.COM
WARSENSOR WSF User Manual
Revision 1 printed 8/16/2005
Mail: info@warsensor.com
9
Note:
Repeat all steps in reverse for proper assembly of internal section. Pay close attention to the
orientation of the striker and bolt assembly. The bolt has an air hole that needs to be facing
down when installed or marker will not function!
Striker Assembly
1
st
striker
2
nd
striker buffer
3
rd
striker spring
4
th
spring guide (pin)
5
th
velocity cap
Bolt Assembly
Bolt (all one part)
To re-assemble please make sure your bolt and
striker are connected properly. When
reinserting the internals into the receiver
ensure that they are both linked together.
It should look like the picture to your right.
Re-installation sequence:
1
st
Re-install the internals (Striker & Bolt
assembly) along with the velocity cap.
2
nd
Re-insert Quick Strip pin to hold everything
together
3
rd
Install all of the cosmetic and external parts
in the reverse order they were taken off.