User's Manual

WWW.WARSENSOR.COM
WARSENSOR WSF User Manual
Revision 1 printed 8/16/2005
Mail: [e-mail]
6
To remove R.I.S. Handle:
Put the 6mm (CR-V6) allen wrench into the
bottom of the R.I.S. handle. Turn in a
Counter-Clockwise motion to remove (Note: It
might be a little tough to remove at first, but
stick with it.).
To remove trigger group and bottom-line:
To remove trigger group and bottom-line:
Start off on the trigger group; take the
smallest allen wrench (5/32) and take off both
trigger screws (that are holding the trigger to
the
gun). Once you have removed the trigger from
the gun you can then remove the bottom-line,
to do so, you must turn in a counter-clockwise
motion to remove.
To remove trigger group and bottom-line:
Once you have removed the trigger from the
gun you can then remove the bottom-line, to do
so, you must turn in a counter-clockwise motion
to remove