User's Manual

WWW.WARSENSOR.COM
WARSENSOR WSF User Manual
Revision 1 printed 8/16/2005
Mail: [e-mail]
3
• Never shoot at domestic animals or wildlife
• Never mark objects outside the confines of the game or authorized shooting areas
• Never look down the barrel of a marker
• Before disassembly, storage, or transport of this marker, remove ALL paintballs from the marker, barrel, and loader: remove
power source: and remove all gas or air from the power system. Insert a barrel plug and put the safety “ON”
• Carry your marker in a case or sturdy bag when transporting it in public
• Safely and securely store marker to prevent access to it by unauthorized persons or minors.
Table Of Contents
Introduction - Will give you a general idea of what to expect with the marker, and give you some
general information about the marker.
Diagram - See website directory.
Section 1
-Remove Internals - Step-By-Step guide on how to remove the internals.
-Lubrication - Will show you every part that needs lubrication in the WSF.
-Re-assemble - Proper way of re-assembling the WSF.
Section 2
-Applying air source - Shows you different configurations and the proper way to apply your air
source.
-Cocking Marker - Shows you how to properly cock your marker
-Leaks - If you have a problem with your WSF leaking.
Section 3
-Adjusting Detent - If your paint is rolling out, please refer to adjusting the ball detent.
-Securing your hopper - Shows you how to secure your hopper.
Section 4
-Adjusting Velocity - Show you how to stay within field limits
-Checking FPS - Safe and proper way of checking FPS