User's Manual

WWW.WARSENSOR.COM
WARSENSOR WSF User Manual
Revision 1 printed 8/16/2005
Mail: [e-mail]
12
Cocking your WSF
To Cock your WSF:
Firmly take the rear cocking bolt. Pull back,
and release. Your marker is now cocked.
Please make sure that your safety is on and
you have your barrel plug in.
Leaks
Leaks when gassing up marker:
If you are gassing up your marker and you hear leaking, please remember to cock your marker before
you gas your marker up.
Leaks out of the barrel.
If you happen to have a leak out of your barrel, it might be because of the Cup Seal.
To get to the Cup Seal, you must enter the Volumizer Chamber. Please make sure to remove any
airsource from the gun and discharge all compression before working with the volumizer chamber.
To enter the volumizer chamber:
You must remove the volumizer plug to get into
the volumizer chamber. To do so, you must
remove the R.I.S. handle, as it is hiding the
screw that holds the plug in place..
(Note: Volumizer plug is under pressure due to
volumizer spring, please secure when removing.)
(Note: If volumizer cap is stuck, the screw used to
secure it may be screwed into the top of plug for easy
removal.)