Specification

!
!
!
912232802 - ArmorPoxy High Build Epoxy - Part A! Revision Date 04-01-2023!
_____________________________________________________________________________________________!
!
6. Accidental Release Measures!
!
6.1 Personal precautions, protective equipment and emergency procedures!
!
Avoid contact with skin, eyes and clothing. Ensure adequate ventilation. ELIMINATE all ignition sources (no smoking, flares, sparks
or flames in immediate area). Stop leak if you can do it without risk. Refer to protective measures listed in sections 7 and 8. Avoid
exceeding of the given occupational exposure limits (see section 8). Personal protection needs must be evaluated based on
information provided on this sheet and the special circumstances created by the spill including; the material spilled, the quantity of
the spill, the area in which the spill occurred, and the training and the expertise of employees in the area responding to the spill.!
!
6.2 Environmental precautions!
!
Prevent product from entering drains. Prevent entry into waterways, sewers, basements or confined areas. See Section 12 for
additional Ecological information.!
!
6.3 Methods and materials for containment and cleaning up!
!
Methods for Containment!
Dike far ahead of liquid spill for later disposal. Absorb with earth, sand or other non-
combustible material and transfer to containers for later disposal. Prevent further
leakage or spillage if safe to do so.!
!
Methods for cleaning up!
Use a non-combustible material like vermiculite, sand or earth to soak up the product and
place into a container for later disposal. Ground and bond containers when transferring
material. Take precautionary measures against static discharges. Use non-sparking tools
and equipment.!
!
7. Handling and storage!
!
7.1 Precautions for safe handling
Advice on safe handling!
!
!
Ensure adequate ventilation. Ground and bond containers when transferring material.
Handle in accordance with good industrial hygiene and safety practice. Avoid contact with
skin, eyes and clothing. Keep away from open flames, hot surfaces and sources of ignition.
Take precautionary measures against static discharges. Do not eat, drink or smoke when
using this product. Use according to package label instructions. Empty containers may
retain product residue or vapor. Do not pressurize, cut, weld, braze, solder, drill, grind, or
expose container to heat, flame, sparks, static electricity, or other sources of ignition. No
smoking.!
!
Hygiene measures!
Avoid contact with skin, eyes and clothing. Remove and wash contaminated clothing before
re-use. Do not eat, drink or smoke when using this product. Wash hands before breaks and
immediately after handling the product.!
!
7.2 Conditions for safe storage, including any incompatibilities!
!
Storage Conditions!
Keep container tightly closed in a dry and well-ventilated place. Keep away from heat, hot
surfaces, sparks, open flames and other ignition sources. No smoking. Keep in properly
labeled containers. Keep away from food, drink and animal feedingstuffs. Store in
accordance with local regulations.!
!
Materials to Avoid!
No materials to be especially mentioned.!
!
8. Exposure controls/personal protection!
!
8.1 Exposure Guidelines!
!
Chemical Name!
ACGIH TLV!
OSHA PEL!
British Columbia!
Alberta!
Quebec!
Ontario TWAEV!
Talc!
14807-96-6!
TWA: 2 mg/m3!
particulate matter!
containing no
asbestos and <1%!
crystalline silica,!
TWA: 20 mppcf if!
1% Quartz or more,!
use Quartz limit!
TWA: 2 mg/m3!
TWA: 2 mg/m3!
TWA: 3 mg/m3!
TWA: 2 mg/m3!
!
_____________________________________________________________________________________________!
04-01-2023 - 912232802 - 1 - AGHS - English -! Page 4 / 11!