Specification

!
!
!
ArmorPoxy High Build Epoxy - Part B!
_____________________________________________________________________________________________!
Toluene! 108-88-3! < 1!
The exact percentage (concentration) of composition has been withheld as a trade secret.!
!
4. First aid measures!
!
4.1 Description of first-aid measures!
!
General advice!
Show this safety data sheet to the doctor in attendance. When symptoms persist or in all
cases of doubt seek medical advice.!
!
Eye contact!
Immediately flush with plenty of water. After initial flushing, remove any contact lenses and
continue flushing for at least 15 minutes. Call a physician or poison control center
immediately.!
!
Skin contact!
Call a poison control center or doctor for treatment advice. Remove and wash contaminated
clothing before re-use. Wash off immediately with plenty of water for at least 15 minutes.!
!
Inhalation!
Move victim to fresh air. Apply artificial respiration if victim is not breathing. Call a physician
or poison control center immediately.!
!
Ingestion!
Call a physician or poison control center immediately. If swallowed, DO NOT induce
vomiting unless directed to do so by medical personnel. Gently wipe or rinse the inside of
the mouth with water. Never give anything by mouth to an unconscious person.!
!
4.2 Most important symptoms and effects, both acute and delayed!
!
Symptoms! See Section 2.2, Label Elements and/or Section 11, Toxicological effects.!
!
4.3 Indication of any immediate medical attention and special treatment needed!
!
Notes to physician!
There is no specific antidote for effects from overexposure to this material. Treat
symptomatically.
!
5. Fire-Fighting Measures!
!
5.1 Extinguishing media!
!
Suitable extinguishing media!
Use CO2, dry chemical, or foam. Water may be unsuitable for extinguishing fires. Water may be used to cool and prevent the
rupture of containers that are exposed to the heat from a fire.!
!
Unsuitable Extinguishing Media! None.!
!
5.2 Special hazards arising from the substance or mixture!
!
Special Hazard!
None known based on information supplied!
!
Hazardous Combustion Products! No information available.!
!
Explosion Data!
Sensitivity to Mechanical Impact None.
Sensitivity to Static Discharge! None.!
!
5.3 Advice for firefighters!
!
Evacuate personnel to safe areas. Move non-burning material, as feasible, to a safe location as soon as possible. Fire fighters
should be protected from potential explosion hazards while extinguishing the fire. As in any fire, wear self-contained breathing
apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear. Thoroughly decontaminate all
protective equipment after use. Use water spray to cool fire-exposed containers. DO NOT extinguish a fire resulting from the flow of
flammable liquid until the flow of the liquid is effectively shut off. This precaution will help prevent the accumulation of an explosive
vapor-air mixture after the initial fire is extinguished.!
!
!
_____________________________________________________________________________________________!
04-01-2023 - - 1 - AGHS - English -! Page 3 / 11!