Instruction Manual

©2021 Armorlite
BEFORE YOU BEGIN INSTALLATION
TOOLS REQUIRED
Armorlite Safety Information
Wear gloves to protect your
hands from any sharp edges
in and around the seats.
Ensure the car is in “Park,” and the
emergency brake is applied.
P
• A second person will help to expedite the installation process.
• Remove factory installed ooring, drain plugs and retainer clips that coincide
with Armorlite purchased product.
• For kit purchases, only remove the factory oor carpet for front and rear seats. Do
not remove the factory carpeting in the cargo area, as the Armorlite cargo mat
lies on top factory oor carpet.
• For instructions on how to remove factory installed ooring there are third-party
online resources available.
• Drain plugs can be found underneath the factory installed ooring - front (2),
rear (2).
• Save clips if you intend to keep and reinstall the factory installed ooring.
• 10 mm socket – Front sill nut and console bolt removal/installation
• Small standard screwdriver – Front sill electrical connector and console plugs (or
trim stick) removal/installation
• T50 Torx head bit or E14 Torx Socket– Seat bolt removal/ installation
• 16 mm wrench – Floormat/carpet stud removal
• Trim stick – Prying plastic parts
VISIT www.GoArmorlite.com/installation FOR A DETAILED INSTRUCTIONAL VIDEO.
Note: Step numbers in the video may not match printed instructions.
Vehicle Application
Jeep Gladiator JT