Instruction Manual

©2021 Armorlite
READ BEFORE INSTALLING
• DO NOT install Armorlite ooring on top of any existing ooring product, including factory or
aftermarket systems, oor mats, carpets or linings of any type.
• Armorlite ooring t could be compromised if installed over a spray-in oor liner due to the
additional thickness.
• Do NOT install any oor coverings or mats on top of Armorlite, as it will hinder your Armorlite oor’s
performance and create a potentially dangerous situation with loose mats.
• Install Armorlite ooring in the proper locations using existing retention points as illustrated in
enclosed instructions or visit www.GoArmorlite.com/installation for installation video.
• Vehicle pedals need to be inspected for full freedom of movement after installation and before each
use. DO NOT DRIVE VEHICLE IF ANY INTERFERENCE EXISTS AT ANY TIME.
• If the ooring is removed for cleaning, follow the installation instructions when reinstalling to ensure
proper t.
• Armorlite ooring is engineered and designed to t the vehicle make and model you purchased.
DO NOT INSTALL in any other vehicle make or model.
• Check the t of Armorlite ooring after it is serviced to ensure it remains securely installed.
• Warnings label and instructions should be kept with the owner’s manual of your vehicle.
CAUTION
Armorlite Safety Information
Vehicle Application
Jeep Gladiator JT
For Support please visit www.GoArmorlite.com/support