Instructions / Assembly

A RMOR DOO R
TM
INSTALLATION OF DOOR SHOE/SWEEP
DOOR SHOE/SWEEP
HORIZONTAL CROSS SECTION
DOOR SHOE
THRESHOLD
DOOR
INTERIOR
EXTERIOR
Installation Instructions
1. Measure and cut door shoe to fit.
2. Items with drip cap should be notched to clear stops on jambs
before installation.
3. Position seal on door with gasket compressed 1/16" against sill.
4. Mark screw holes.
5. Drill pilot holes with a 7/64" bit.
6. Install with screws provided.
7. Adjust position so that gasket does not impede proper closing
and latching of door.