Safety Data Sheets (SDS)
Table Of Contents
- - SECTION 1: Identification
- - SECTION 2: Hazard(s) identification
- - SECTION 3: Composition/information on ingredients
- - SECTION 4: First-aid measures
- - SECTION 5: Fire-fighting measures
- - SECTION 6: Accidental release measures
- - SECTION 7: Handling and storage
- - SECTION 8: Exposure controls/personal protection
- - SECTION 9: Physical and chemical properties
- - SECTION 10: Stability and reactivity
- - SECTION 11: Toxicological information
- - SECTION 12: Ecological information
- - SECTION 13: Disposal considerations
- - SECTION 14: Transport information
- 14.1 UN number
- 14.2 UN proper shipping name
- 14.3 Transport hazard class(es)
- 14.4 Packing group
- 14.5 Environmental hazards
- 14.6 Special precautions for user
- 14.7 Transport in bulk according to Annex II of MARPOL and the IBC Code
- Information for each of the UN Model Regulations
- - SECTION 15: Regulatory information
- 15.1 Safety, health and environmental regulations specific for the product in question
- National regulations (United States)
- Industry or sector specific available guidance(s)
- National inventories
- 15.2 Chemical Safety Assessment
- 15.1 Safety, health and environmental regulations specific for the product in question
- - SECTION 16: Other information, including date of preparation or last revision
SECTION 3: Composition/information on ingredients
3.1 Substances
Not relevant (mixture)
3.2 Mixtures
Description of the mixture
Name of substance Identifier Wt% Classification acc. to GHS Pictograms
Siloxanes and Silicones, di-
ME, [[[3-[(2-
aminoethyl)amino]propyl]
dimethoxysily]oxy]-termin-
ated
CAS No
71750-80-6
1 – < 5 Eye Irrit. 2B / H320
Polyethylene glycol tri-
methylnonyl ether
CAS No
60828-78-6
1 – < 5 Eye Dam. 1 / H318
isobutane CAS No
75-28-5
1 – < 5 Muta. 1B / H340
Carc. 1A / H350
Flam. Gas 1 / H220
Press. Gas C / H280
propane CAS No
74-98-6
1 – < 5 sA / OSHA002
Flam. Gas 1 / H220
Press. Gas C / H280
For full text of abbreviations: see SECTION 16.
SECTION 4: First-aid measures
4.1 Description of first-aid measures
General notes
Do not leave affected person unattended. Remove victim out of the danger area. Keep affected person warm, still and
covered. Take off immediately all contaminated clothing. In all cases of doubt, or when symptoms persist, seek medical
advice. In case of unconsciousness place person in the recovery position. Never give anything by mouth.
Following inhalation
If breathing is irregular or stopped, immediately seek medical assistance and start first aid actions. Provide fresh air.
Following skin contact
Thaw frosted parts with lukewarm water. Do not rub affected area.
Following eye contact
Remove contact lenses, if present and easy to do. Continue rinsing. Irrigate copiously with clean, fresh water for at least
10 minutes, holding the eyelids apart.
Following ingestion
Rinse mouth with water (only if the person is conscious). Do NOT induce vomiting.
Safety Data Sheet
acc. to 29 CFR 1910.1200 App D
Armor All Extreme Shield + Ceramic Wheel Cleaner- Aerosol
Version number: 4.0
Replaces version of: 2020-10-21 (3)
Revision: 2020-12-03
United States: en
Page: 3 / 19