Safety Data Sheets (SDS)

Safety Data Sheet
STP Products Manufacturing Company
44 Old Ridgebury Road
Suite 300
Danbury, CT 06810
Tel. [phone]
Armor All® Snow Foam Car Wash Page 3 of 6
Methods and Materials for Containment / Cleanup: Absorb with an inert material. Collect into a suitable container
for disposal. Rinse area with water.
7. Handling and Storage
Precautions for Safe Handling: Avoid eye and skin contact. Avoid breathing mists or vapors. Use only with
appropriate protective equipment. Launder contaminated clothing before re-use. Wash thoroughly after handling
and before eating, drinking, smoking or using toilet facilities. Keep out of the reach of children.
Empty containers retain product residue and may be hazardous. Do not reuse empty containers.
Conditions for Safe Storage, Including Any Incompatibilities: Protect containers from physical damage. Store in
a cool, well-ventilated area away from strong acids, bases, oxidizers, and other incompatible materials.
8. Exposure Controls / Personal Protection
Exposure Guidelines:
CHEMICAL
EXPOSURE LIMIT
Sodium (C14-16) Olefin sulfonate
None Established
Alkyl (C10-16) Ether Sulfate, Sodium Salt
None Established
Glycerin
15 mg/m
3
TWA OSHA PEL (Total dust)
5 mg/m
3
TWA OSHA PEL (Respirable fraction)
Cocamidopropyl betaine
None Established
Lauramidopropylamide Oxide
None Established
Myristamidopropylamine Oxide (C14)
None Established
Appropriate Engineering Controls: General ventilation should be adequate for all normal use.
Personal Protective Equipment
Respiratory Protection: Good general ventilation (equivalent to outdoors) should be adequate under normal
conditions. For operations where exposures may be excessive use a NIOSH approved respirator (mask) with
appropriate eye protection. Selection of respiratory protection depends on the contaminant type, form and
concentration. Select in accordance with OSHA 1910.134, and all other applicable regulations; and good Industrial
Hygiene practice.
Gloves: Impervious gloves such as rubber, neoprene or nitrile are recommended to avoid skin contact.
Eye Protection: Wear chemical safety goggles if eye contact is possible.
Other Protective Equipment/Clothing: Use protective clothing as necessary to avoid skin contact.
9. Physical and Chemical Properties
Appearance and Odor: Liquid with a pleasant odor.
Physical State: Liquid.
Odor Threshold: Not determined
pH: < 11
Specific Gravity: Not determined
Initial Boiling Point/Range: Not determined
Vapor Pressure: Not determined
Melting/Freezing Point: Not determined
Vapor Density: Not determined