Safety Data Sheets (SDS)

® Safety Data Sheet
STP Products Manufacturing Company
44 Old Ridgebury Road
Suite 300
Danbury, CT 06810
Tel. 1-203-205-2900
Armor All® Extreme Tire Foam Protectant Page 2 of 5
rinsing. If eye irritation persists: Get medical attention.
Hazards not otherwise specified: None
3. Composition/Information on Ingredients
Component
Amount
Propellant (propane, isobutane)
1 - 10%
Alcohol ethoxylate
<2%
The specific identity and/or exact percentage (concentration) of composition has been withheld as a trade
secret.
4. First Aid Measures
Inhalation: If symptoms of exposure develop, remove to fresh air. Seek medical attention if breathing problems or
irritation persist.
Skin Contact: Rinse skin with plenty of water. If skin irritation or redness develops, seek medical attention.
Eye Contact: If contact occurs, flush eyes with large quantities of water for at least 15 minutes, holding the eyelids
apart. Get medical attention if irritation persists.
Ingestion: Get medical assistance by calling a doctor or poison center. Never give anything by mouth to a person
who is unconscious or drowsy.
Most Important Symptoms: Causes eye irritation. Prolonged skin contact may cause mild irritation.
Indication of Immediate Medical Attention/Special Treatment: Immediate medical attention should not be
required.
5. Firefighting Measures
Suitable (and Unsuitable) Extinguishing Media: Use dry chemical, carbon dioxide, foam, or water spray.
Specific Hazards Arising from the Chemical: Contents under pressure. Keep away from ignition source and
open flames. Exposure of containers to heat and flames can cause them to rupture, often with violent force.
Thermal decomposition will generate oxides of carbon, and silicon; and formaldehyde.
Special Fire Fighting Procedures: Firefighters should always wear positive pressure self-contained breathing
apparatus and full protective clothing. Cool fire-exposed containers with water. Use shielding to protect against
bursting cans.
6: Accidental Release Measures
Personal Precautions, Protective Equipment, and Emergency Procedures: Eliminate all sources of ignition.
Ventilate area with explosion proof equipment. Wear appropriate protective clothing and equipment.
Methods and Materials for Containment and Clean-Up: Place leaking can in a pail in a well-ventilated area away
from ignition sources until pressure has dissipated. Collect liquid using inert material and place into a suitable
container for disposal.