Technical data

7
1
INTRODUCTION
1.1 GENERAL INFORMATION
1.1.1 TYPE OF MANUAL
Operation and Maintenance (including a List of Spare Parts).
1.1.2 MODEL NUMBER AND EQUIPMENT NAME
Armasight CO-MINI Night Vision Clip-On System.
Armasight CO-MINI MG Night Vision Clip-On System.
1.1.3 PURPOSE OF EQUIPMENT
The CO-MINI is a night vision system intended to be used for short to medium ranges (normally up to
350 yards) in conjunction with a daytime sight or riescope (hereafter referred to as a “day scope”).
When mounted on a weapon in front of an existing day scope, the CO-MINI adds night vision function-
alitytothescope’scapabilities,withoutaectingtheboresight.
The CO-MINI is compatible with most commercial and military specication day scopes or binoculars,
upto6Xmagnication,andtsanyPicatinnyMILSTD1913orWeaverrailviathequick-releasemount.
Optional adapters make it possible to mount the CO-MINI directly to the objective lens of a variety of
day scopes and binoculars.
A long-range IR850 illuminator (hereafter referred to as the IR850) enables use of the CO-MINI in ex-
tremely low light conditions or total darkness. Other additional equipment, such as an infrared laser,
red dot sight, etc., may also be installed on the CO-MINI.
Additionally, the CO-MINI MG version incorporates gain control, which allows the user to increase or
decrease the brightness of the image to compensate for overly bright or extremely dark conditions.
NOTE:
The CO-MINI can also be installed in front of the viewnders of various instruments to widen
the operational illumination range.
1.1.4 REPORTING EQUIPMENT IMPROVEMENT RECOMMENDATIONS
Recommendations from the user for improvements to the device are encouraged.
MailyourcommentstoArmasightInc.,815DubuqueAvenue,SouthSanFrancisco,CA94080,USA.
Or, send an email to [e-mail].