Technical data

3
CAUTION:
• DONOTdismantletheequipment.
• Keep the equipment clean. Protect it from moisture, dramatic temperature changes, and
electric shocks.
• DONOTdroporhittheequipment.
• Protecttheequipmentfromoverexposuretolight.DONOTactivatetheequipmentinday-
light with the objective lens cap removed; DO NOT aim the equipment at bright light sources
(re, car headlights, lanterns, street lamps, room lights, etc.).
• DONOTforcetheequipmentcontrolspasttheirstoppingpoints.
• DONOTleavetheequipmentactivatedduringbreaksinoperation.
• Verifythattheequipmentisobeforeinstallingabattery.
• DONOTstoretheequipmentwiththebatterystillinit.
• Toavoiddeformationordamage,removethelightsuppressorfromtheCO-MINIbeforeplac-
ing the equipment in storage.
• Thoroughlycleananddryeachitembeforeplacingthemintothestoragecase.
• ScopeMountingSystemsarenot recommended for installing the CO-MINI on rearms hav-
ing vigorous recoil (0.308 Win or stronger).
NOTES:
• TheopticalaxesoftheCO-MINIanddayscopeshouldalign.Thedistancebetweentheaxes
shouldnotexceed2mm.IfthedierenceintheaxisheightsoftheCO-MINIanddayscope
above the weapon rail exceeds 2mm, you will need to replace the day scope mounting rings
or monoblock.
• Atoperatingtemperaturesbelow-20°C(-4°F),alkalinebatterylifewillbeseverelyreduced.
Under these conditions, the use of lithium battery is recommended.
• Theequipmentrequiressomelevelofambientlight(moonlight,starlight,etc.)tofunction
correctly.
• Performanceofthedeviceinnighttimeconditionsdependsonthelevelofambientlightin
the environment. Please remember the following:
The level of ambient light is reduced by the presence of clouds, shade, or objects that
block natural light (trees, buildings, etc.).
— Theequipmentislesseectivewhenoperatedinshadowsandotherdarkenedareas.
— Theequipmentislesseectivewhenoperatedinrain,fog,sleet,snow,dustorsmoke.
The equipment will not “see” through dense smoke.
• Forthepurposeofreturningdefectivecomponents,retainallpackagingmaterials.