Technical data

28
3.3.4 SHUTDOWN
Shut-down the CO-MINI as follows:
1. Turnothedevice.Thegreenglowwilldisappear.
2. Place the cap over the objective lens.
3. Remove the CO-MINI from the weapon/day scope lens.
4. Removethelightsuppressorfromtheoutputlens.
5. Screw the cap into the output lens thread.
6. Remove the IR850 from the CO-MINI.
7. Remove the batteries.
CAUTION:
Do not store the equipment with the battery still in it.
CAUTION:
Remove the light suppressor from the CO-MINI to avoid deformation or damage.
8. Ensure that the CO-MINI and any accessories are clean and dry before placing them into the storage
case.
9. PlacetheCO-MINIandanyaccessoriesintotheappropriatelocationsinthestoragecaseandclose
the cover.