Technical data
19
Install the battery as follows (refer to Figure 3-1):
1. Unscrew the battery cap (C) and check the position of the adapter (D). See Figure 3-2 for the correct
positioning of the threaded adapter, which changes depending on the battery being installed.
2. If necessary, change the adapter position in the cap. Use the special wrench.
3. Install the battery (B) into the battery compartment (A). Follow the battery symbol (E).
4. Replacethebatterycap(C).
3.1.2 IR850 BATTERY INSTALLATION
CAUTION:
Ensure that the IR850 is o before installing the battery.
Install the CR123A battery as follows (refer to Figure 3-3):
1. Unscrew the battery cap (A).
2. Install the battery (B) into the battery compartment. Align the plus sign on the battery with the plus
sign on the cap face.
3. Replace the battery cap (A).
B
A
FIGURE 33. THE IR850. BATTERY INSTALLATION
3.1.3 INSTALLING THE COMINI ONTO A PICATINNY/ WEAVER RAIL
WARNING:
When installing the equipment on a weapon, verify that the weapon is clear and that the safety
is on before proceeding.
BATTERY CAP
FIGURE 32. POSITIONS OF THE ADAPTER IN THE BATTERY CAP
CR123A
AA
INSERT
BATTERY CAP
INSERT