Technical data

15
2.3 STANDARD COMPONENTS
TheCO-MINIstandardcomponentsareshowninFigure2-3andlistedinTable2-9.
The ITEM NO. column indicates the number used to identify items in Figure 2-3.
FIGURE 23. STANDARD COMPONENTS
1
2
2
3
4
5
7
9
10
11
12
8
6
TABLE 29. STANDARD COMPONENTS
ITEM NO. DESCRIPTION QUANTITY
1 CO-MINI Night Vision Clip-On Device
A night vision device intended for use in conjunction with a day scope.
1
2 Mount for IR illuminator #60
A Weaver-type rail mounted to the CO-MINI. Allows the IR850 or other additional
equipment to be installed on the CO-MINI.
2
3 М4×8 Flat Head Socket Cap Screw
Used for attaching the mount and Weaver rail to the CO-MINI.
4
4 Single Lever-Lock Quick Release Picatinny Mount #27
A quick-release mount (QRM) used to install the CO-MINI on a Picatinny/ Weaver rail.
1
5 Advanced Wireless Remote Control
Wireless control used to operate the CO-MINI in short-time activation mode. Ensures
quick and silent CO-MINI activation/deactivation. Delivered with two CR2016 (3V)
batteries installed.
1
6 Picatinny Adaptor for Advanced Wireless Remote Control
A adaptor mounted to the Picatinny rail of an weapon. Allows the Advanced Wire-
less Remote Control to be installed on the weapon.
1
7 Light Suppressor 1
A rubber cup mounted to the CO-MINI output lens to reduce light scattering. Used
when installing the CO-MINI in front of day scopes with lens housing outer diameter
overtherange25.4to42.0mm.
1
8 IR850 Detachable Long Range Infrared illuminator
Long-range infrared illuminator. Should be used when there is little to no ambient
light.
1